Over the past years, recreational vehicle is getting prevalent, particularly among adventurers. Having this kind of vehicle will give you opportunity to experience an enriched comfort and luxury, in spite of the rough environment of camping sites.
Installing, Removing, Emptying toilet, Cleaning, Hooking sewer hose, and hiding hose.
RV toilets may be a blessing for anyone who enjoys spending great time in outdoors but do not necessarily wants to look for a well-cloaked tree as soon as nature calls. Aside from cooking, bed facilities as well as lots of storage, most of the recreational vehicles have their own bathrooms. Together with the toilet, it is generally smaller than those in most houses. Also, recreational vehicle toilets function quite differently than what you can be used to.
There are smaller and larger RV bathrooms. Smaller ones have 2 sections, waste is collected inside the bottom section and should be manually emptied. Larger vehicle toilets offer more privacy, waste is collected in a detached holding tank and is emptied from the outside. This recreational vehicle has a located pedal beneath the bowl. By pressing the pedal using your foot, fresh water will rush into the black water tank that is attached underneath the vehicle.
The black and gray water should be emptied each few days. The frequency relies on the number of persons using the toilet. The tank needs to be emptied first before you travel since full tanks increase its weight and decrease gas mileage. When both tanks are already empty, leaves the valves open, go in the RV and run fresh water inside the toilet. This will help to cleanse any remaining waste. Close the valves, detach, rinse as well as store the hose.
How to Install RV Toilet?
Installing an RV toilet is a good idea. You will need a gasket, mounting kit and some bolts. Before you start, make sure to remove old bolts and gaskets.
So, here’s how to install your new RV toilet:
- Make sure the RV water is turn off. Afterward, flush the toilet in order to reduce any water line pressure. Remove any plastic cover that goes all around the base.
- Unscrew one or two bolts you will find after removing the cover. However, don’t just lift the toilet yet. Unscrew the hose attached to the commode’s top back.
- Clean the area and toilet using paper towels. You can even gently clean the inside of the water line.
- Firmly put your new toilet in place. Line up the bolt holes and toilet as well as screw the fitting down tight. After that, sit on the new installed toilet to check whether it wobbles. Screws and bolts should be tightened a bit more and voila! Your recreational vehicle toilet is done to enjoy the comfort even you have long hours of adventure.
Watch the video
How to Use a Travel Trailer Porta Potty?
Porta Potty, port-a-loo, portable chemical toilets—whatever you may want to call it, one must have a knowledge on how to make use of travel trailer porta potty when you need to use it. Toilets are considered as necessary when you need to camp away from home or overnight, and it wouldn’t be useful if you would stop every few miles just to use a facility for your personal use. Thus, it would be much more convenient to use a toilet potty in your travel trailer if you are going to travel far or camp in the wilderness for your recreational activity. Here are some of the helpful information on how to use a travel trailer porta potty:
- There is a fresh water tank attached underside of the travel trailer. Each time the potty toilet flush, about two quarts of water are being flushed or run thorough the porta patty. When the toilet flushed, seals in the valve for black tank & seals in the porta potty work together with chemical used to control and keep other from escaping or invading the travel trailer, so make sure to get the right disinfectant and chemical deodorant that will be used in your travel trailer’s toilet.
- The liquids used in this type of toilet don’t completely disinfect wastes, therefore, waster or sewage products from your porta potty should not be discharged to ground surface or even in surface waters.
- The reduced wastewater volume from the recirculating porta potty toilets should be discharged to those larger holding tank and not to the sub surface’s absorption system.
It’s better to know how to use a travel trailer porta potty than to go bumbling in the wilderness just to look for somewhere to release your excess digested matters.
Why do I have to use special toilet paper for RV
Are you a practical owner? You are certainly particular with expenses and quality of any item you buy. In terms of choosing a toilet paper for rv, you need to consider about its efficiency. Selecting a product just because of the exterior package doesn’t make any sense. If you are asking whether it is necessary to prefer a special toilet paper or not, you should think well. Of course, “special” is quite related to high quality in the long run.
There are reasons for such claim. First, RV toilet paper is really intended for a specific purpose. It is not just for display or anything. This kind of paper is used for avoiding any sort of “clog” on the sewage system. Next, a special toilet paper has a “fine” texture. This means that the product promotes easy dissolving process. If you choose such option, your RV toilet would be conducive for usage. Another reason for using a special toilet paper is its ability to allow easy tank dumping. On the other hand, a substandard toilet paper will just add to your burden.
RV toilet paper also has desirable features compared to the other choices. Being “biodegradable” means that the disposal will be convenient. Special toilet papers are specifically manufactured for RVs. Why will you settle with just any products? You should always go with the RV toilet paper over the ordinary ones.
Money should be out of your concerns in buying the best toilet paper. You may just miss the chance of using a suitable brand for your RV. Without realizing it immediately, you will save money if you invest on quality over the price.
How to Remove RV Toilet?
If not maintained, recreational vehicle toilets will possibly break. The water line underneath it can also break and freeze if it’s not drained in a cold weather. Oftentimes, removing of toilet requires to replace and access the line. You don’t need to have advanced skills because removing RV toilets only needs minimal tools and no innovative skills.
To ensure safety and proper removal of your toilet, follow these simple steps:
- Park your recreational vehicle on a parallel area and chock its wheels. Get the holding tank be emptied and cleaned with fresh water. Make sure there is no waste from the holding tank that enters the RV.
- Switch off all the water sources and water pump. Flush the toilet to allow existing water to drain from the line. Put towers around the toilet base to prevent spilling waters on the floor.
- Place the water hose on the toilet’s back. Unscrew the hose and let towels catch all spillover.
- Pull the plastic base from the RV toilet. Typically, the base is two portions snapping in and out of the area. Put a towel around the toilet in order to catch all water.
- Crescent wrench should be used when removing the nuts from the toilet’s base. If the bolts are rusty, spray pungent oil on them. Then, wait for some minutes. They must then easily unscrew.
- Reach around the toilets’ back. If there is a water-supply valve, turn it off. Remove water hose connecting the toilet to RV water system.
- Lift the toilet up to take it away. If it sticks, lightly tilt it from side to side until it works free from the recreational vehicle’s floor.
- Dispense with the broken toilet in an appropriate way. Do not just throw your old toilet inside a campground dumpster. Many municipal waste companies include special procedures on how to dispose of toilets and any household fixtures.
One person can carry out removing the toilet of a recreational vehicle. However, it is helpful if you have an additional hand when carrying your toilet. Keep also a small pail near the toilet if the water line has more water that you expect. Wearing rubber gloves is also important to protect your hands from unseen insects and bacteria that can be underneath the toilet.
Watch another video
How to Empty a Portable Toilet?
Camping is one of the best recreational activity that you and your friends or family can enjoy. However, being out of home can offer a little inconvenience, particularly if you don’t know where you are going to dispose all the contents of your portable toilet. Remember, proper waste disposal is one of the most important key to keep the campsite clean and odor free. To help you on how to empty your portable toilets, here are some of the guidelines that you need to consider:
- Most portable toilets have a waste indicator located on its side which helps you see if your portable toilet is already full. Locate the lock-type switch or handle on the unit, holding two sections together, you should pull it up making sure that the portable toilet is held on a flat surface. Before doing this, make sure you will use nose mask and gloves.
- These 2 sections should come apart. Its top section should be placed to the side, then, dump the contents of its sewage/waste section to your campground’s sewage/waste disposal tank.
- If you’re going out on a camping where there’s no disposal tank, make sure to bring a shovel with you. Using your shovel, dig a hole that has a depth of 8 inches where you’re going to dispose your toilet’s content. Cover the whole with soil so that waste will not attract flies and breeding place for maggots. This is one of the best options at hand, not unless you want to out its content in a plastic trash bag and bring it with you for later disposal.
A great camping or outdoor recreational activity will never be complete without an odorless and clean toilet!
How to Replace RV Toilet Seat?
One of the greatest benefits of having a camping in RV (recreational vehicle) is the easy access toilet facility that it provides for its users. But as an RV owner, you should also be responsible of the maintenance and repair work of your vehicle’s facility including the replacement of your old, cracked or loose RV toilet seats. Furthermore, replacing your toilet seat will also prolong the life of your RV’s most ‘comfortable zone’. To help get started on how you can replace your RV toilet seat, here are some of the steps that you should follow:
- Look for a toilet seat that is compatible or that will match with your RV’s toilet seat, or purchase one which has the same model as your previous seat to avoid ending up going back and forth because you have brought one that does not fit to your RVs toilet. When purchasing, make sure to look for one, which offers an easy removal feature to make it easier for you to clean your entire toilet seat when conducting a general cleaning.
- Once done with your purchase. The next thing to do is to make the replacement process. Just move your old toilet seats’ retaining clips in a counter-clockwise direction to lift off the lid. Then, unscrew bolts holding the seat in place, and once free, simply lift up the seat up & off. Make use of flat head screwdriver to pry open the cover pieces.
- Unscrew the metal or plastic bolts, currently securing the seats. At that point, you can lift away your old toilet seats for discard.
- Put the new toilet seat on the top of the bowl, make sure to secure in place with metal or plastic bolt.
Now that you’ve learned how to replace your toilet bowl, there’s no reason for you not to do it yourself.
How does a camping toilet chemical work?
Have you ever tried using a camping toilet? From the word itself “portable camping toilet”, you already have your idea about it. A portable camping toilet is basically designed to have the most convenient way of having a proper sanitation despite of the loss of comfort rooms that you usually use in the city. The fact that you are in a place like forest, seaside or forest already gives you the view of having nowhere to rush
One of the main reasons why many people who want to go camping already have their idea of using portable toilet is because it is very lightweight. It doesn’t really matter wherever your destination or camping site is located for it is given that camping toilets are very easy to bring because of its weight. Additionally, you may even place it on wherever you want from the camping site that makes it really idea for a toilet.
Another reason for using portable camping toilet is because of its compact design that is design for a long time use. This can be cleaned well and stored or be recycled for another camping destination that you want to achieve. Ideally, its compact design is well planned and incorporated which comes for a perfect toilet that you may bring in particular areas where comfort rooms are not present.
Portable camping toilets are easy to clean and it is one great feature that you would probably want to have. Ideally, the cleaning steps for a portable toilet can also be very easy. All you just have to ensure is that you have the knowledge on how you can clean it with a cleaning chemical to thoroughly clean the toilet and make it recyclable.
How to Clean Portable Camping Toilet
Before immediately starting the cleaning, make sure first that you already have your cleaning materials with you. Next to this is to empty the tank of the portable camping toilet. After emptying the portable toilet, rinse this well with a clean water.
Remove all extra mix on the tank which comes from the pressure lines and the suction of the portable toilet. You can efficiently do this by making few pumps in the tank. By this you’ll effectively remove all the mix inside the tank.
The next step in cleaning is to get some of the mixture of chemicals that you are going to use for cleaning well the toilet. Use at least 1/2 cup of bleach and put it in a gallon of water. Pour it into the top tank then shake it around or let the bleach be applied all around the toilet to clean its wall.
Get the top tank and place it on the top of bottom tank and continue the process by operating the pump for distributing the bleach water all throughout the areas ad until the water has been transferred into bottom tank.
After the bleach water distribution inside the tanks, remove the tank (top) and carefully turn it upside- down to drain well the bleach water. After this, shake the tank (bottom) to evenly allow some water to go down. Empty the tank and let it be dried for the final step.
There you have it-steps in cleaning portable camping toilet.
How to hook up and use an RV sewer hose
When it comes to sewage system, people should rely on high quality equipment rather than doing a random selection. The success of picking the right tool will lead to efficiency of the waste-water system. There is a need to attend to the condition of the hoses, valves, pipes, and adapters.
- Wear disposable gloves. Some people overlooked the use of gloves before they operate the RV sewer hose. Not wearing gloves can lead to health risks over time.
- Check if you had closed the RV valves. It is important to notice the cap present on the hose before releasing anything. Certainly, you wouldn’t want to be surprised with the collected wastes.
- Connect the sewer hose. Make a connection between the waste fitting and the hose. Try to replace the hose into the inlet of the dump station.
- In a slow manner, open the black-colored tank valve first. A high pressure might give you a blast.
- Make sure that the grey tank is drained accordingly. Once the tank valve was closed, it is ideal to open it slowly again. There should be an absence of leaks.
- Have the RV waste valves closed tightly? It is now allowed to close the tank valves, both the greywater and black one.
- Finally, remove the hose from the RV. For a successful disconnection, twist the ends. Return the cap on its initial position.
You can now maximize the use of your RV sewer hose through following the procedures above. The entire system won’t be at risk if you are equipped with the right knowledge. After familiarizing the essential steps, you will be able to depend on yourself in times of unexpected circumstances.
Watch this Camco RhinoFlex Video
How to Hide your sewer hose?
Do you like to make your sewer hose hidden? It is too traditional to see a hose which is just laid on the floor, right? Certainly, you want to have an idea on how to conceal this bulky thing. It is true that seeing a sewer hose around is associated with a “smelly” connotation.
Here are some ideas you can consider:
- Keep the hose on the rear bumper. This is just a practical suggestion for you. There’s no need to buy something just to attain the purpose. It will simply take a talent on how you will do it like a professional. You will not spend any amount for doing such tip.
- Buy a storage tube. Specifically, you can prefer the plastic material for a lightweight tube. Worrying about the price is not an issue because there are products that are offered at economical rates. It is possible to attach the chosen tube into the sewer hose. As another option, the owner can also mount it under his RV.
- Keep it on a compartment. People must be aware that there are available compartments for a sewer hose. A compartment could be found on a sewer bay attachment. No one can see the hose until he opened the storage space.
- Use a vinyl fence. If you have sufficient budget, you can use this item to store the sewer hose.
After knowing the listed options on hiding your sewer hose, you are no longer burdened on how to make the hose kept accordingly. With minimum cost, there’s no space for hesitations. As a smart RV owner, you should be innovative enough to discover the recent ways on how to successfully conceal a large hose.